Product Packages:
- K3 Pro Device
- Helmet adapter bracket (optional)
- Picatinny rail adapter
- Thermal scope eyecup
- Cables
- User Manual
- Charger and wiring
- Battery
- Warranty card
Installation:
1.1.1 Handheld
No accessories are needed for handheld use, the monocular can be used directly after the battery is installed, handheld use by default.
1.1.2Head-mounted Use
The head-mounted adapting bracket (optional) should be installed after the battery is inserted, the mounting procedures are as follows:
1. Remove the head-mounted adapting bracket, fix the set screw of the bracket into the holes of the deceive;
2. Put the deceive onto the standard helmet support;
Note: The flip image should be set first in the system menu for head-mounted use.
1.1.3 Thermal Sight Use
The Picatinny rail adapter should be installed on the device after the battery is inserted for thermal sight use, then mount the device onto the Picatinny rail, the installation procedures are as follows:
1. Remove the Picatinny rail adapter, and mount it on the two screw holes with 2*M5 screws;
2. Change eyecup, remove the U-shaped eyecup and install the thermal sight eyecup onto the diopter adjustment wheel of the eyepiece;
3. Mount the monocular installed with rail adapter to the Picatinny rail.
1.1.4 Clip-on Sight Use
The clip-on hoop should be installed on the monocular after battery insertion during clip-on sight use, then mount the monocular on the optical sight, the installation procedures are as follows:
1. Remove the U-shaped eyecup, and mount it on the two screw holes with 2*M5 screws;
2. Mount the monocular installed with clip-on hoop onto the objective lens of daylight optical sight.
Reviews
There are no reviews yet.