Product Packages:
- A10 LRF Device
- Picatinny mount
- Power adapter
- Charger ·Data cable
- Lens cloth
- A L-shaped wrench
- M5 screw × 4 pcs
- Warranty card
- User Manual
- Battery 26650×2
- Portable bag
Maintenance:
Maintenance should be carried out at least twice a year and consist of the following actions. Wipe the external surfaces of metal and plastic parts free of dust and dirt with a cotton cloth. Silicone grease maybe used for this. Clean the electrical contacts of the battery and battery slot on the unit using a non-greasy organic solvent. Check the glass surfaces of the eyepiece and the lens. If necessary, remove dust and sand from the lenses (preferably using a non-contact method). Cleaning of the external surfaces of the optics should be done with substances designed especially for this purpose.
A10 LRF, connected to an external Screen
80m LRF hog hunting, footage
100m LRF footage
Frequently Asked Questions
The possible reason is the battery power, you can charge the battery first then start up the device again.
The problem is about the low screen brightness,
It's the setting error, the solution is to check whether the sight is firmly installed. Make sure that the type and caliber of bullets you use are the same as those used in previous calibration. If you calibrate in summer, but use it in winter (or vice versa), the calibration point may also move slightly.
Reviews
There are no reviews yet.